Q-Switch ND Yag Laser for Tattoo Pigment Removal

Preparation
Before you start the treatment, please confirm the following information:
1) Observe the water level observation window to ensure that the water level is above the specified level;
2) Check all the system connections;
3) The emergency switch is not pressed;
4) All personnel in the treatment area have worn protective glasses or goggles.

Equipment Maintenance
1) Periodically clean the surface of the device with a soft, wet cotton cloth. Be careful not to allow liquids to penetrate inside the cabinet.
2) After each treatment, the treatment head should be cleaned. When cleaning, first wipe with a soft cloth, then use another soft cloth to dip into alcohol, and then fully dry.
3) Change the cooling water once a month. The cooling water should be pure water or distilled water.